 |
|
|
 |
 |
|
 |
|
|
| Tel:
913-906-0400 • Fax: 913-906-9815 • USA
|
Oil Purifier Model: MB-100 for oil reservoir size up to 1,000 gallons (3785 liters) .
 |
Example
: For AW 46 hydraulic oil with oil reservoir size up to 1,000
gallons(3785 liters). Completed clean oil turnover rate = 4 to 8 days Complete oil dialysis for troubled equipment 10 passes x 1,000 gal/ 100 GPH /24 hr = 4 days Oil dialysis for normal equipment 5 passes x 1,000 gal/ 100 GPH /24 hr = 8 days Completed clean oil turnover means that almost 100% of oil contamination such as minute particulate, dissolved water and oil oxidation were removed from the lubricating oil, rather than having to replace the old oil with clean new oil in customer's oil reservoir. |
MB-100
Rotational Unit
The MB-100 is a rotational unit which can be moved from equipment oil
reservoir to the others for rotational oil cleaning in order to maintain
the highest oil cleanliness on a continuous basis so lubricating oil can
be at its best lubricating performance under severe conditions.
MB-100 Specifications *
| MB-100 Dimension: | 24" dia. filter size x 2 filters , 32"W x 60"L x 30"H |
| Weight: | 500 pounds (230 kgs) |
| Flow Rate: | 70 to 100 GPH depending on oil viscosity |
| MB-100 Pump Data: | Tandem Pump 4 GPM Positive displacement, 1/3 HP motor |
| MB-100 Power Source: | 480V-3ph or 220V-3ph or 380VAC-3ph |
| MB-100 Heater: | 8,900 Watts, Incoloy flange heater with built-in thermostat control |
| Controller: | Programmable digital controller with EEPROM retained memory and battery backup |
| Electric Enclosure: | NEMA 12 metallic enclosure, water tight, dust proof, terminal blocks, contactors, all components are UL and CE approval, meet NEC (National Electric Code) standard |
| Automatic Control: | Auto stop by differential pressure switch shut down, timer switch, optional oil level switch to detect low oil level |
| Alarm Light: | "REPLACE FILTER" alarm pilot light . |
| High Temp Alarm: | "AUTO SHUT DOWN" when oil temperature exceed 180 °F |
| Oil Strainer: | Inlet oil strainer for pump protection |
| Safety Device: | Built-in pressure relief valve |
| Discreet Output: | Ready discreet output wired from terminal block to PLC |
| Discreet Input: | Ready discreet output wired from terminal block to PLC |
* Specifications are subject to change without notice.
MB-100 is suitable for any industrial equipment that has an oil reservoir up to 1,000 gallons (3,875 liters) capacity. It can be designed to be installed as a dedicated oil dialysis unit while equipment is running.
Applications
Equipment application: The MB-100 can be
used in plastic injection molder, extruder, blow molder, all types of
hydraulic power units for off-road vehicles, mining equipment, earth moving
equipment, hydraulic bulldozer, hydraulic power unit for trash trucks,
freight loading cranes, marine hydraulic power units, banbury machine,
diesel power generator, rotary air compressor, small gear boxes, lube
oil bearings, vacuum pump etc.
Oil application: Hydraulic oil, gear oil,
compressor, transmission oil, Phosphate Ester, fire resistant hydraulic
oil, synthetic oils, insulating oil, quenching oil etc.